Production of hydraform bricks, M7M1 hydraform bricks machine is the best choice
M7M1 hydraform machine originated in the early 21st century, and its appearance solved the problems of difficulty in producing bricks and high construction cost in rural areas. M7M1 hydraform machine only needs clay as the main raw material, and then a small amount of cement is added. Through press molding, high-strength hydraform clay bricks can be produced, and then houses can be built after air drying and curing, without firing. This not only saves production costs, but also saves natural resources and protects the local ecological environment, which is very in line with the strategy of green environmental protection and sustainable development in today’s society.
Four reasons why HENRY recommended customers to choose M7M1 hydraform bricks machine
M7M1 hydraform machine comes with JQ200 mixer, with a diameter of 1000mm. It can mix 300kg of raw clay materials in 2 minutes, which can fully meet the production requirements of the M7M1 hydraform bricks machine. In this way, customers don’t need to buy a blender separately, which can reduce the upfront investment for customers. Besides, the M7M1 hydraform block machine integrates production, moving, and mixing, like a free-moving small production factory, which is very suitable for customers who need to change production sites frequently.
The overall size of the M7M1 compressed earth block machine is 2,600×1,400×1,600 mm, and the total weight is 1300 kg. M7M1 hydraform machine uses the well-known domestic brand diesel engine “CHANGCHAI” as the power source, with a power of 8HP, which is very powerful and can continuously output. The technology is mature and the quality is reliable, providing sufficient power support for the production of hydraform bricks by the M7M1 hydraform bricks machine.
In the process of producing hydraform bricks, the core step of the M7M1 hydraform machine is to press the clay raw materials in the mold through the hydraulic system, so the hydraulic pressure is very important. For this reason, HENRY equipped the M7M1 hydraform bricks machine with a hydraulic pressure of 20 tons, which can quickly press the clay raw materials in the mold to ensure the smooth surface, high density, and durability of the hydraform bricks produced.
The M7M1 hydraform block machine is equipped with two operating platforms, which can be used for production at the same time. The production cycle is 15-20 seconds, and 2,880 hydraform bricks can be produced in 8 hours.
Technical Data
- Tab1
Specification Parameter
| Overall size | 2600*1400*1600mm |
| Weight | 1300kgs |
| Host machine rated power | 10HP |
| Compressive force | 20 tons |
| Brick forming period | 15-20s |
| Mixer model | JQ200 |
| Shaping method | Hydraulic press |
| Worker | 2-3 Worker |
| Block mould | One set for free |
| Color | Customizable |
| Machinery Test Report | Provided |
| Raw material | Soil, Clay, Earth, Mud, Cement |
| Place of Origin | Shandong |
| Condition | New |
| After-sales Service Provided | Engineers available to service |
| Product name | M7MI hydraform machine |
M7M1 Hydraform bricks machine production capacity:
Why M7M1 hydraform machine is so popular in Kenya, Tanzania, and other African countries?
01. M7M1 hydraform machine mould
Why M7M1 hydraform machine the best choice for producing hydraform clay brick? The answer lies in HENRY’s design of the mold. When HENRY designed the M7M1 hydraform bricks machine mold, he chose the vertical brick, so that the width and thickness of each hydraform clay brick produced are completely consistent, so that workers can ensure that the thickness and height of the wall are consistent when building walls, which is very important for building houses
02.Brand diesel engine
The technology of the diesel engine is mature, which can provide power for the M7M1 hydraform bricks machine stably, and can work normally in high temperatures, cold, rain, and snow, regardless of climate and natural conditions. A diesel engine can work only by adding diesel oil, which is very convenient and can be produced at any place. Moreover, diesel oil is cheap and can be easily bought in most countries.
03.High quality tire
The M7M1 compressed earth block machine is equipped with high-quality tires, which are the same as those on automobiles. They are very solid and durable, made of international high-standard rubber and solid stainless steel, and have very strong wear resistance and grip, and long service life. After the M7M1 hydraform block machine is equipped with tires, it can move freely. It can choose to produce hydraform bricks near raw materials or near construction sites, which reduces transportation costs and improves production efficiency
04.Hydraulic oil pipe
The hydraulic oil pipe of the M7M1 hydraform machine is a passage for conveying hydraulic oil, which can control the hydraulic system of the M7M1 hydraform bricks machine through the pressure and flow of hydraulic oil to complete the hydraulic action. The hydraulic oil pipe selected by HENRY is resistant to high temperature and high pressure, can withstand the pressure of 35 MPa, has good sealing performance and does not leak oil, and ensures the safe and stable operation of the M7M1 hydraform block machine hydraulic system.
05.Hydraulic operate handle
The hydraulic operator handle is the control center of the M7M1 hydraform bricks machine, and workers can operate the hydraulic operator handle to realize actions such as pressing and mold lifting, so as to realize the production of clay bricks. The M7M1 compressed earth block machine is equipped with two handles, so two workers can operate and produce at the same time without interference. As the control center of the M7M1 hydraform block machine, the Hydraulic operating handle is sensitive, ergonomic, accurate, and durable. After heat treatment, it has strong fatigue resistance and is very durable.
06. JQ200 mixer
M7M1 hydraform machine comes with JQ200 mixer, with a diameter of 1000mm. Workers can operate it by controlling the operating lever, and 300kg of clay raw materials can be stirred every two minutes, which is more than enough to meet the production demand of the M7M1 hydraform bricks machine. In order to solve the problem that the three hydraulic cylinders of the M7M1 hydraform block machine share a hydraulic oil pump, HENRY chose a high-quality triple pump to ensure the normal operation of the hydraulic system
Main advantages of M7M1 compressed earth block machine
Construction workers use hydraform bricks produced by M7M1 hydraform machine to build hydraform houses
- Real pictures from the scene
Some clay bricks pictures and parameters (6)
Size:230×220×115mm
2 pieces per mould
360 pieces per hour
2880 pieces per 8 hours
Size:300×150×100mm
2 pieces per mould
360 pieces per hour
2880 pieces per 8 hours
Size:300×150×100mm
2 pieces per mould
360 pieces per hour
2880 pieces per 8 hours
Size:225×112.5×60mm
2 pieces per mould
360 pieces per hour
2880 pieces per 8 hours
Size:300×150×100mm
2 pieces per mould
360 pieces per hour
2880 pieces per 8 hours
Size:150×150×100mm
4 pieces per mould
720 pieces per hour
5760 pieces per 8 hours
M7M1 hydraform bricks machine can produce different clay soil bricks types
- Hydraform/ hydraform blocks / hydraform block machine price list / hydraform bricks houses for Ghana
- How to use the strongest interlocking bricks CLC Lego blocks to lay rainproof eave caps with CEBs
- Why can hydraform M7M1 interlocking brick machine also make earth soil lego blocks and pavers ?
- Real Feedback from customers in Congo using of the M7M1 diesel clay soil earth interlocking machine
Why is hydraform bricks so popular in Nigeria, Kenya, India and other countries?
Hydraform bricks uses clay as the main raw material, which reduces the use of cement and does not need to be fired after production, which not only protects the local ecological environment, but also greatly reduces the production cost. Hydraform bricks produced by M7M1 hydraform machine have a unique structural design, and the hydraform bricks can be interlocked up and down, front and back, so that when workers use hydraform bricks to build houses, not only is the construction very simple, but also the walls are very firm
Some photos of customer receiving and using M7M1 hydraform bricks machine
M7M1 hydraform bricks machine What other supporting equipment is needed for a complete production line (5)
Overall size 2600*1400*1600mm Weight 1300kgs Host machine rated power 10HP Compressure force 20 tons Brick forming period 15-20s Mixer model JQ200 Shaping method Hydraulic press Worker 2-3 Worker 
Overall size 1500*800*1500mm Max.feeding size 300*400mm Power 5.5kw Capacity 7-10 ton Total weight 320kgs 
Power 0.75kw Capacity 7-10 ton Hole diameter 4mm Total weight 350kgs Dimension 1500*800*1200mm 
Raw Material fiber and flax Bending Strength more than 60N/mmˆ2 Flexural Modulus more than 4.5*10ˆ3Mpa Impact Strength more than 60KJ/mˆ2 Temperrater tolerance 80-100℃ Thickness 15-50 mm At customer’s request Width/Length At customer’s request 
Size 2400*1000*1300mm Power 2.2KW Voltage 12V*4pcs Working hours 10 hours Operation Electro hydraulic Advantage Strong climbing ability
First of all, raw materials, including clay and cement, needed for the M7M1 hydraform machine to produce hydraform bricks need to be prepared. Clay particles are required to be fine without stones, roots, weeds, garbage, and other impurities.
Step 2: Pour the clay raw materials into the JQ200 mixer provided by the M7M1 hydraform bricks machine, add a proper amount of water, and start stirring for two minutes. After stirring, the workers open the outlet of the JQ200 mixer and catch the clay raw materials with buckets or pots.
In the third step, the workers pour the clay raw materials into the M7M1 hydraform block machine mold box, and then the workers finish the production of hydraform bricks through the actions of distributing, clamping, and pressing.
Step 4: After the hydraform bricks are demoulded, the workers transport the hydraform bricks to the maintenance area.
With the addition of wheel design, the M7M1 hydraform machine becomes very flexible and can easily change production sites, which is very suitable for customers who need to change production sites frequently. Customers can move the M7M1 hydraform bricks machine to a place close to raw materials to produce hydraform bricks, or they can move the M7M1 hydraform nigeria to a construction site to produce hydraform blocks. This convenient design is loved by more and more customers.
First of all, after receiving the M7M1 hydraform machine, customers need to check whether the screws, nuts, tubing joints, and other places are loose. If they are loose, we have tools such as wrenches given to customers, and customers can use wrenches to tighten the screws, joints, and other places. Before running the M7M1 hydraform bricks machine prices, customers need to add engine oil to the oil tank and hydraulic oil to the hydraulic oil tank.
First of all, it is necessary to add about 5% cement to the clay raw materials, and thoroughly mix them with the JQ200 mixer provided by the M7M1 hydraform machine. In the second step, the clay raw material is pressed by the M7M1 hydraform bricks machine. M7M1 hydraform block machine has a hydraulic pressure of 20 tons, and the compacted hydraform bricks have a very high density. Thirdly, the finished hydraform bricks need to be placed in a cool place, watered 2-3 times a day to avoid cracking, and maintained for 7-10 days.
English 
Russian 
Spanish 
Arabic 
French