HR2-40 Best Selling Soil and Clay Interlocking Manual Brick Making Machine
1. This manual brick-making machine does not need any electricity or diesel oil but only needs manpower to operate the machine manually by pressing. It’s a very energy-saving manual brick-making machine and hand press. It uses the most scientific lever principle, which is very labor-saving. You only need to put the mixed clay into the mold, cover the upper cover of the mold, and gently squeeze it to make very smooth and strong clay interlocking bricks. Henry can design the compression ratio to 1:1.8. The interlocking bricks produced in this way are very strong.
2. The operation is simple, and it can be done at a glance, without complicated technology and training, and it is easy to learn and use.
3. The price is low and the investment is small, which can not only save the budget but also buy high-quality products,
and the later maintenance cost is low.
4. You can use this machine to produce different kinds of clay soil and earth interlocking bricks by changing the mold of the manual brick-making machine.
5. This manual brick-making machine is Very flexible, small in size, can move the production position as you want , you can use it at our home , or bush area or city center, because it won’t bring any noise , and does not need complicated supporting equipment.
What are the necessary supporting equipment for HR2-40 manual brick making machine?
1.JQ350 soil mixer(optional)
2. Soil crusher machine(optional)
3. Soil Sieve machine/ screen machine(optional)
What kind of clay soil mixer does manual brick making machine HR2-40 need?
The production capacity of the HENRY JQ350 mixer is to mix 800kg of soil materials every 2 minutes, which fully meets the production needs of the HR2-40 manual brick-making machine.
What benefits can clay crusher bring in the production process of manual brick making machine?
Even hard and Large pieces of clay can be quickly crushed into smaller particles, so the soil / earth finished products goes to be powder and ash.which improves the production efficiency and reduces the labor cost. and most important is that the interlocking bricks are very smooth and high quality for building
What convenience can sieve machine bring to HR2-40 manual brick making machine?
1. The materials crushed by the clay crusher can be further separated to remove large particles and impurities to be 2mm in diameter, thus greatly improving the quality of materials and ensuring the quality of clay bricks in the high-standard production process.
2. Reduce the time and energy of manually screening materials and improve the efficiency of producing clay bricks.
We can provide any clay brick making machine you want.
HENRY intelligent block-making machines have manual brick-making machines, diesel-powered soil/clay/earth brick-making machines, semi-automatic interlocking brick-making machines, and full-automatic hydraulic paving brick-making machines.
HR2-40 manual brick making machine technical parameter
- Technology datas
- Interlocking Brick production output:
| Overall size | 900*500*2000(mm) |
| Molding Cycle | 40s-45s |
| Production Capacity | 120-150per Hour |
| Brick Raw Material | Clay / Cement / soil / earth or Other |
| Color | Adjustable |
| Weight | 280kg |
| Mold treatment | Carburizing heat treatment |
| Block mould | One set for free |
| Warranty of core components | 1 year |
| Color | Adjustable |
| Pallet Size | No Need Pallet |
| Mold | Changeable,Steel Casting Molds |
Get More Operation Videos
How to standardize and efficiently use HR2-40 manual brick making machine to produce clay (soil)interlock bricks?
1. Dig clay in the production site, and put the soil into a soil crusher machine to quickly crush them into smaller clay particles.
2. Put the finished clay particles into a sieve machine for further screening, so as to remove large clay particles, stones, roots and other impurities, and ensure the high quality of materials.
3. Feed the final clay, water and cement into JQ350 mixer for 2 minutes.
4.Feed the stirred materials into the mold box of the HR2-40 manual brick-making machine and manually press and form the interlocking bricks.
The ultra-tough manganese steel used by Henry has been quenched, and the mold hardness has increased by 2-3 times, the toughness of the mold steel plate has increased by 3 times, and the wear resistance is higher. Regardless of the sand content or gravel content of the raw materials used by the customer, the mold can be used for more than 10 years.
There are two series of interlocking bricks used to build houses. The first is Lego interlocking bricks, and the second is hydraform interlocking bricks. The most commonly used lego bricks are 300*150*100mm whole bricks, half bricks (half bricks are used for the corners of the wall), and U-shaped bricks (U-shaped bricks are used for the upper edge of the window).
Henry does not recommend customers to use this manual interlocking brick machine to produce concrete interlocking bricks because the concrete raw materials usually contain a lot of sand, stone, and other particles with poor compressibility, which are very difficult to extrude. After forming, it is difficult to produce bricks. We have special interlocking brick machine equipment for producing concrete raw materials. Welcome to send a message to inquire; thank you very much
English 
Russian 
Spanish 
Arabic 
French