High quality, fully automatic HR2-10 fly ash bricks making machine
HR2-10 fly ash bricks making machine adopts PLC electric cabinet control system to realize automatic production, subverting the traditional manual and semi-automatic production mode, which can not only save labor cost, but also greatly improve production efficiency. The automatic production controlled by the system will also ensure the unification and standardization of clay bricks produced by the HR2-10 fly ash bricks machine price, which is very suitable for large-scale production.
HR2-10 fly ash bricks making machine uses clay and fly ash as raw materials, with a low production cost. Clay can be obtained from local materials, and fly ash can be provided by a fly ash factory to realize the recycling of resources. HR2-10 fly ash bricks making machine adopts a hydraulic system, and the hydraulic pressure of 40 tons can instantly compress 190mm raw materials into 100mm clay bricks, which are very compact. At present, the fly ash bricks making machine price of HR2-10 is favorable. Welcome to send an email to consult us.
What is the 40 tons HR2-10 fly ash bricks making machine ?
HR2-10 fly ash bricks making machine is equipped with a total power of 7.5kw, which is powerful, like a power source. It can continuously convey hydraulic pressure to all hydraulic systems of HR2-10 clay brick making machine for sale, realize the completion of hydraulic actions such as material distribution, mold closing, hydraulic forming and demoulding, and ensure the efficient output of clay bricks.
The pressure and speed of HR2-10 fly ash bricks making machine are adjusted by electronic equipment such as PLC electric control box and solenoid valve, and the compression ratio is controlled at 1:1.75 to 1:1.9. Accurate control can ensure that the size of each clay brick produced by HR2-10 brick maker machine for sale is consistent, which is very important and will directly affect whether the wall height is uniform and whether the wall surface is flat when building a house.
The overall size of the HR2-10 fly ash bricks making machine is 2400*1400*2800mm, the total weight is 1400kgs, the hydraulic pressure reaches 40 tons (adjustable), the voltage is 380v/50 hz 3 phase(Adjustable), and the production capacity is 700-720 bricks/ per hour. JQ350 mixer is required.
HR2-10 fly ash bricks making machine can form two hydraform bricks of 230*220*115mm at a time, and the forming cycle is 10-15s, and nearly 4,000 hydraform clay bricks can be produced in 8 hours. The output of the HR2-10 fully automatic brick making machine is considerable, and there is no problem in meeting the needs of small and medium-sized brick factories. Regarding the HR2-10 fly ash bricks making machine cost, please send an email to consult us.
Technical Data
- Tab1
Specification Parameter
| Overall size | 2400*1400*2800mm |
| Shaping cycle | 10-15 seconds |
| Main power | 7.5kw |
| Voltage | 380v/50 hz 3 phase(Adjustable) |
| Production capacity | 700-720 bricks/ per hour |
| Mixer | JQ350 |
| Pressure | 40 tons (adjustable ) |
| Worker | 2-3 Worker |
| Block mould | One set for free |
| Total weight | 1400kgs |
| Color | Customizable |
| Machinery Test Report | Provided |
| Raw material | Clay, fly ash, cement |
| Place of Origin | Shandong |
| Condition | New |
| After-sales Service Provided | Engineers available to service |
| Product name | HR2-10 fly ash bricks making machine |
HR2-10 fly ash bricks making machine production capacity:
What high-quality accessories and advanced technology are used in HR2-10 fly ash bricks making machine?
01.fly ash brick mold
The core secret that an HR2-10 fly ash bricks making machine can produce a variety of clay brick types is the diversification of molds. HR2-10 small fly ash bricks machine can produce different brick types by replacing different molds, and the mold box is designed in one piece, which is very convenient to replace. The mold of the HR2-10 hand operated fly ash brick making machine adopts advanced production processes such as heat treatment, quenching, wire cutting, carbon dioxide shielded welding, thickened steel plate, and computer design drawings. All the processes and technologies are aimed at making the mold more accurate, firmer, and prolonging its service life.
02.High quality electrical motor
The operation of the hydraulic system of the HR2-10 fly ash bricks making machine relies on the motor to provide power. For this reason, HENRY adopts the domestic high-quality brand motor with a total power of 7.5kw, so as to ensure the oil quantity and pressure of hydraulic oil, and the produced hydraform clay brick is of good quality. The motor equipped with the HR2-10 rotary type fly ash bricks machine has high working efficiency, stable operation, low noise, quick response, and long service life.
03.PLC electrical control box
The PLC control box is the core control system of the HR2-10 fly ash bricks making machine, enabling automated production, including raw material transportation, filling of raw materials into molds, hydraulic forming, and demolding. This achieves automation and standardization in the production of hydraform clay bricks. The HR2-10 fly ash bricks making machine cost’s PLC control box with features a touchscreen interface for intuitive display and easy operation.
04.Solenoid valve
The HR2-10 fly ash bricks making machine’s powerful hydraulic system is composed of solenoid valves, hydraulic oil pipes, a PLC electrical control box, and a hydraulic power station.The solenoid valve equipped with HR2-10 fly ash bricks machine price in raipur is sensitive to response, and can respond quickly within tens of milliseconds. At the same time, it has good sealing performance, strong anti-interference ability, high temperature resistant material and long service life.
05.Hydraulic oil pipe
The hydraulic oil pipe is the link and bridge connecting the hydraulic station and the hydraulic cylinder. By conveying the hydraulic oil, the hydraulic actions, such as the rising and falling of the HR2-10 fly ash bricks making machine mold and hydraulic forming, can be completed. When transporting hydraulic oil, the hydraulic oil pipe needs to bear great pressure. For this reason, HENRY chooses polyurethane material and a hydraulic oil pipe with internal alloy steel wire, which can bear the pressure of 20MPa. HR2-10 fly ash brick machine price in kolkata adopts a hydraulic oil pipe with good sealing performance, a safe interface, and no oil leakage.
06.Steel Plate Material
HR2-10 fly ash bricks making machine has a very high standard for the selection of steel, and a strong fuselage frame can ensure that HR2-10 fly ash brick making machine in Coimbatore will not deform after being used for more than ten years. To this end, HENRY chose Q345B high-quality steel, which has higher strength, more corrosion resistance, and more wear resistance.
What are the main advantages of the HR2-10 fly ash bricks making machine
Bricks maker use clay bricks produced by HR2-10 fly ash bricks making machine to build houses
- Real pictures from the scene
Some clay bricks pictures and parameters (6)
Size:300×150×100mm
2 pieces per mould
480 pieces per hour
3840 pieces per 8 hours
Size:300×150×100mm
2 pieces per mould
480 pieces per hour
3840 pieces per 8 hours
Size:230×220×115mm
2 pieces per mould
480 pieces per hour
3840 pieces per 8 hours
Size:300×150×100mm
2 pieces per mould
480 pieces per hour
3840 pieces per 8 hours
Size:300×150×100mm
2 pieces per mould
480 pieces per hour
3840 pieces per 8 hours
Size:300×150×100mm
2 pieces per mould
480 pieces per hour
3840 pieces per 8 hours
One HR2-10 fly ash bricks making machine can produce a variety of clay brick types
How to choose the suitable brick type when customers buy HR2-10 fly ash bricks making machine?
First of all, customers need to investigate the local market and choose several local hot-selling bricks. Or customers can tell us which country they are from, and our team will give suggestions to customers according to the most used brick types in this market, so that the clay bricks produced by customers using the HR2-10 fly ash bricks making machine will sell well.
Photo exhibition on delivery and loading of HR2-10 fly ash bricks making machine into containers
HR2-10 fly ash bricks making machine What other supporting equipment is needed for a complete production line (5)
Overall size 2400*1400*2800mm Shaping cycle 10-15 seconds Main power 7.5kw Voltage 380v/50 hz 3 phase(Adjustable) Production capacity 700-720 bricks/ per hour Mixer JQ350 Pressure 40 tons (adjustable ) Total weight 1400kgs 
Overall size 1500*800*1500mm Max.feeding size 300*400mm Power 5.5kw Capacity 7-10 ton Total weight 320kgs 
Power 0.75kw Capacity 7-10 ton Hole diameter 4mm Total weight 350kgs Dimension 1500*800*1200mm 
Mixing Motor Power 5.5kw Production Capacity 16m³/h Feed Capacity 350L Efficiency ≥15m³/h Rotating Speed Of Stirring Blade 35r/min Maximum Particle Size Of Bone Particles 8mm/6mm Reducer Model 315 
Weight 150kgs Size 4000*700*400mm Motor power 1.5kw Belt type “V”type Speed 1.5m/second
Compared with concrete bricks, clay bricks produced by the HR2-10 fly ash bricks making machine have a very low raw material cost and a great cost advantage. Moreover, clay, as the main raw material for producing clay bricks, is very easy to obtain, and it does not need to be purchased or transported.
Cement is added to the clay raw material, which makes the strength of the clay bricks very high. Moreover, the clay bricks have an interlocking design, and the adjacent clay bricks can be interlocked and embedded to form a whole, which is very firm and very simple to construct.
Therefore, the clay brick produced by the HR2-10 fly ash bricks machine price has the advantages of low production cost, unique structural design, simple construction, and resource saving, and its development prospect is very good.
The answer is no firing. Clay bricks produced by the HR2-10 fly ash bricks making machine are made of clay and cement, and the clay raw materials added with cement will become very strong after air drying, so it is unnecessary to fire.
Secondly, the hydraulic pressure of the HR2-10 fully automatic brick making machine reaches 40 tons (the hydraulic pressure can be customized), and the strong hydraulic pressure can press the clay raw materials very tightly with high compactness. After natural air drying and scientific maintenance, the clay brick produced by HR2-10 small fly ash bricks machine has high strength, which can completely meet the building requirements of building houses, houses, foundations, load-bearing walls, courtyard walls, and so on.
The answer is yes. HENRY will provide customers with detailed operation instructions of the HR2-10 fly ash bricks making machine and various teaching videos, including installation videos, operation videos, mold replacement videos, maintenance videos, and so on. If customers have questions, our after-sales team will guide them through video calls. If the customer has higher requirements, we can also send engineers to the customer’s site for guidance and teaching, so that the customer can fully master the use of the HR2-10 fly ash bricks making machine cost.
The answer is of course. We can customize the customer’s logo on the mold of HR2-10 fly ash bricks making machine, so that every clay brick produced by the customer using HR2-10 fully automatic brick making machine will bear the customer’s logo and produce a unique clay brick. At the same time, in order to consider the display effect of the logo, we suggest that the customer’s logo should be controlled within 5 letters.
English 
Russian 
Spanish 
Arabic 
French